Vanish powder perfectly removes dirt, odors and dust accumulated in the carpet. It was created especially for cleaning large areas of carpets. It dries quickly, so you can vacuum the carpet after just 20 minutes. In addition, its great advantage is its fresh scent!

For easy and effective cleaning of large areas of carpets, we recommend using Vanish Powder for large areas of carpets.

How to use Vanish Powder for carpets:

Ventilate the room before applying the product.
Vacuum the carpet.

Shake the Vanish bag vigorously before use.

Turn upside down and tear off both films on the bottom of the package.

Hold the package by the handle on top and shake it over the carpet to spread the powder. Do not add water.

Using a soft brush, immediately rub the powder into the floor covering. Go to the next section.

Wait 20 minutes for the powder to dry. Tightly close the package with the tape at the bottom of the bag. Empty or insert a new dust bag in the vacuum cleaner. Vacuum the carpet thoroughly.
There may be some light stains left on the carpet after vacuuming. They are formed when the powder sticks to the deposits on the carpet; they can be removed with a soft brush and a vacuum cleaner

Tips

Always test the product on an inconspicuous section of the carpet to see if it causes discoloration. Wait for this section to dry completely. If you notice a color change, do not use the product on any other part of the carpet.

Do not use the product on fabrics that can only be chemically cleaned.